Panasonic to BACnet/IP & MS/TP - Up to 128 Indoor Units
Item number IN771AIR00LO000
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 128 indoor units from a single interface.
The interface supports both BACnet/IP and BACnet MS/TP protocols.
Connection is simple, as the interface connects directly to the outdoor unit’s communication bus.
A scan function is available for automatic identification of the units present in the VRF system.
Signals assigned to the outdoor unit are available to be used in the integration.
Energy consumption signals from each indoor unit are available, so they can be checked individually.
Configuration of the interface can be carried out through either its IP or USB (Console) port.
Templates can be imported and reused as often as needed, significantly reducing commissioning time.
Both the Intesis MAPS configuration tool and the interface's firmware can receive automatic updates.
Take the complexity out of the integration process: Create your project with a predefined template, configure the needed parameters, enable the desired signals, and check the communication between the gateway and the system.
Samsung to BACnet/IP & MS/TP - Up to 4 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Panasonic to Home Automation - Up to 64 Indoor Units
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single interface.
Fujitsu to BACnet/IP & MS/TP - Up to 64 Indoor Units
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 64 indoor units from a single interface.
Replaced by: IN770AIR00SO000
This Panasonic application was designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
Mitsubishi Heavy Industries to Home Automation - Up to 4 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a Home Automation system. The solution allows the integration of up to 4 indoor units from a single interface.
Midea to BACnet/IP & MS/TP - Up to 4 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Samsung to Home Automation - Up to 64 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single interface.
Replaced by: IN770AIR00SO000
This Hitachi application was designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
Mitsubishi Heavy Industries to Home Automation - Up to 16 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a Home Automation system. The solution allows the integration of up to 16 indoor units from a single interface.
Panasonic to Modbus TCP/RTU - Up to 16 Indoor Units
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 16 indoor units from a single interface.
Hitachi VRF systems to BACnet/IP & MS/TP Application - Up to 4 Indoor Units
The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Mitsubishi Heavy Industries to Modbus TCP/RTU - Up to 16 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 128 indoor units from a single interface.
Hitachi to Modbus TCP/RTU - Up to 64 Indoor Units
The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 64 indoor units from a single interface.
Samsung to KNX - Up to 4 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.
Midea to Modbus TCP/RTU - Up to 4 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 4 indoor units from a single interface.
Mitsubishi Heavy Industries to KNX - Up to 16 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a KNX installation. The solution allows the integration of up to 16 indoor units from a single interface.
Replaced by: IN770AIRXXSO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allowed the integration of up to 4 indoor units from a single interface. Please refer to the new product reference for further details.
Mitsubishi Heavy Industries to BACnet/IP & MS/TP - Up to 16 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface.
Fujitsu to KNX - Up to 64 Indoor Units
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a KNX installation. The solution allows the integration of up to 64 indoor units from a single interface.
Mitsubishi Electric to Modbus TCP/RTU - Up to 50 groups
The Mitsubishi Electric application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 50 groups from a single interface.
Replaced by: IN770AIR00SO000
This Hitachi application was designed to allow bidirectional control and monitoring of Hitachi VRF systems from a KNX installation. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
Replaced by: IN770AIR00SO000
This Panasonic application was designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allowed the integration of up to 16 indoor units from a single interface. Please refer to the new product reference for further details.
Mitsubishi Heavy Industries to Home Automation - Up to 128 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a Home Automation system. The solution allows the integration of up to 128 indoor units from a single interface.
Bosch Commercial to Modbus RTU - 4 indoor units
The Bosch-Modbus gateway allows bidirectional communication between Bosch Commercial and VRF systems and Modbus RTU (RS-485) networks, bringing total control and supervision of the AC unit through its internal variables.
Midea to Modbus TCP/RTU - Up to 64 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 64 indoor units from a single interface.
Fujitsu to Home Automation - Up to 64 Indoor Units
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single interface.
Haier to KNX - 8 indoor units
The Haier-KNX gateway allows bidirectional communication between Haier Commercial and VRF systems and KNX installations. This communication brings total control of the AC unit from KNX, including monitoring of the AC unit’s internal variables, running hours counter (for filter maintenance control), and error codes.
Panasonic to KNX - Up to 64 Indoor Units
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a KNX installation. The solution allows the integration of up to 64 indoor units from a single interface.
Samsung to Modbus TCP/RTU - Up to 4 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 4 indoor units from a single interface.
Replaced by: IN770AIR00MO000
This Hitachi application was designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or BACnet MS/TP client. The solution allowed the integration of up to 64 indoor units from a single interface. Please refer to the new product reference for further details.
Samsung to KNX - Up to 64 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a KNX installation. The solution allows the integration of up to 64 indoor units from a single interface.
Replaced by: IN770AIRXXSO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface. Please refer to the new product reference for further details.
Panasonic to Modbus TCP/RTU - Up to 64 Indoor Units
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 64 indoor units from a single interface.
Fujitsu to Modbus TCP/RTU - Up to 16 Indoor Units
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 16 indoor units from a single interface.
Fujitsu to Modbus TCP/RTU - Up to 4 Indoor Units
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 4 indoor units from a single interface.
Hitachi VRF systems to BACnet/IP & MS/TP Application - Up to 64 Indoor Units
The Hitachi application has been specially designed to allow bidirectional control and monitoring of Hitachi VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 64 indoor units from a single interface.
Panasonic to KNX - Up to 4 Indoor Units
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.
Samsung to Home Automation - Up to 4 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a Home Automation system. The solution allows the integration of up to 4 indoor units from a single interface.
Panasonic to Home Automation - Up to 16 Indoor Units
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a Home Automation system. The solution allows the integration of up to 16 indoor units from a single interface.
Midea to Home Automation - Up to 4 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a Home Automation system. The solution allows the integration of up to 4 indoor units from a single interface.
Samsung to Home Automation - Up to 16 Indoor Units
The Samsung application has been specially designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a Home Automation system. The solution allows the integration of up to 16 indoor units from a single interface.
Replaced by: IN770AIR00MO000
This Hisense application was designed to allow bidirectional control and monitoring of Hisense VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allowed the integration of up to 64 indoor units from a single interface. Please refer to the new product reference for further details.
Hisense to BACnet/IP & MS/TP - Up to 4 Indoor Units
The Hisense application has been specially designed to allow bidirectional control and monitoring of Hisense VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Bosch Commercial to Modbus RTU - 8 indoor units
The Bosch-Modbus gateway allows bidirectional communication between Bosch Commercial and VRF systems and Modbus RTU (RS-485) networks, bringing total control and supervision of the AC unit through its internal variables.
Panasonic to BACnet/IP & MS/TP - Up to 16 Indoor Units
The Panasonic application has been specially designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface.
Replaced by: IN770AIR00SO000
This Samsung application was designed to allow bidirectional control and monitoring of Samsung NASA VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allowed the integration of up to 8 indoor units from a single interface. Please refer to the new product reference for further details.
Toshiba to KNX - 64 indoor units
The Toshiba interface has been specially designed to allow bidirectional control and monitoring of Toshiba VRF systems from a KNX installation. The gateway is directly connected to the outdoor unit's communication bus and enables control of all the indoor units connected to the system.
Mitsubishi Electric to KNX - Up to 100 groups
The Mitsubishi Electric application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a KNX installation. The solution allows the integration of up to 100 groups from a single interface.
Mitsubishi Electric to Modbus TCP/RTU - Up to 100 groups
The Mitsubishi Electric application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 100 groups from a single interface.
Midea to Home Automation - Up to 16 Indoor Units
The Midea application has been specially designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a Home Automation system. The solution allows the integration of up to 16 indoor units from a single interface.
Training from HMS Academy reduces the total cost and time of your project and gives improved quality and efficiency of the solution.
HMS offers trainings related to products, technologies and more. This could be in the form of an onsite training, online training or by running one of our E-learning sessions.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
