![CAN range extension in battery test systems](https://media.hms-networks.com/image/upload/c_fill,g_auto,f_auto,q_auto,dpr_auto,e_sharpen,w_1650/v1697024686/Licensed/Images/shutterstock_2147295307.jpg?sf_dm_key=t7wDKZD69F2JcterXJIGshWpcZhyL3Poskqq2AA5vS81)
Language
Enabling easy CAN network monitoring and expansion over Ethernet
Item number 1.01.0332.20000
The Ixxat CAN@net NT 200 is a multifunctional gateway, bridging CAN and Ethernet networks for remote access and enhanced reliability. It features two CAN channels and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
The Ixxat CAN@net NT series simplifies the connection of computers to CAN-based networks. It provides versatile integration options for diverse requirements for a wide range of CAN applications.
Facilitates system expansion and flexible network topologies like tree or star structures. This allows users to scale their systems as needed without significant infrastructure changes.
Optimized topologies enable simpler wiring in CAN systems. This reduces the need for complex cabling, leading to cost savings in installation and maintenance.
In gateway mode, the CAN@net NT 200 easily connects to computers via TCP/IP, facilitating the integration of multiple CAN systems through LAN or the Internet and enhancing system accessibility.
In bridge mode, the device enables easy access and message exchange between CAN systems over Ethernet, allowing for long-range communication and control within extensive networks.
With its CAN interfaces, the CAN@net NT 200 offers increased bandwidth and improved data transfer rates, ensuring dependable and efficient operation for critical applications.
By offering advanced filter, ID translation, and data mapping and multiplexing functionalities, the CAN@net NT 200 streamlines network traffic and enhances efficiency.
The device allows additional programming of action rules using LUA, enabling tailored responses to specific network events.
Available MQTT protocol support allows for direct transmission of information to the cloud, facilitating IoT and remote monitoring applications
The CAN@net NT 200 enables easy network segmentation, whilst the integrated galvanic isolation enhances the protection of the device against damage to electronics caused by voltage peaks.
As the CAN@net NT 200 is supported by Ixxat VCI driver packages, it easily integrates with existing VCI-based applications and custom programs, allowing for seamless Ethernet access to CAN systems.
The availability of a Windows configuration tool allows for easy setup and maintenance via USB or Ethernet, making the system accessible and manageable without required programming skills.
KNX to Modbus TCP & RTU - 1200 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects EtherCAT and Interbus CU control systems
The Anybus X-gateway EtherCAT Slave to Interbus CU Slave enables you to connect any EtherCAT system to any Interbus CU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects Interbus FO and PROFINET-IO control systems
The Anybus X-gateway Interbus FO Slave to PROFINET-IO Device enables you to connect any Interbus FO system to any PROFINET-IO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enable seamless integration of serial devices to Studio 5000
The Anybus EtherNet/IP to Modbus TCP Linking Device converts Modbus TCP to EtherNet/IP, enabling you to connect any Modbus TCP device to a Logix PLC control system. The linking device presents Modbus TCP data as easily processed I/O data, offloading the PLC from working with extra calculations and allowing for seamless integration with Studio 5000.
A protocol converter that connects ControlNet and Modbus RTU control systems
The Anybus X-gateway ControlNet Adapter to Modbus RTU Slave enables you to connect any ControlNet control system to any Modbus RTU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects Modbus TCP and Modbus TCP control systems
The Anybus X-gateway Modbus TCP Server to Modbus TCP Server enables you to connect any Modbus TCP control system to any Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
BACnet/IP & MS/TP to Modbus TCP & RTU - 3000 points
Integrate any BACnet MS/TP or BACnet/IP server device with a Modbus BMS or any Modbus TCP or RTU controller. This integration aims to make BACnet objects, data, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
Enable communication between industrial devices and Industrial Ethernet networks
The Anybus CompactCom 40 Common Ethernet is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET, EtherCAT, EtherNet/IP, Modbus TCP, Powerlink, or BACnet/IP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
A protocol converter that connects DeviceNet devices to Modbus RTU PLCs
The Anybus X-gateway DeviceNet Master to Modbus-RTU Slave enables you to connect any DeviceNet device or equipment to Modbus-RTU control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects Interbus CU and Modbus TCP control systems
The Anybus X-gateway Interbus CU Slave to Modbus TCP Server enables you to connect any Interbus CU system to any Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enable communication between industrial devices and PROFINET IRT networks
The Anybus CompactCom 40 PROFINET IRT - Transparent Ethernet is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. The Transparent Ethernet channel lets you utilize high-end processors for custom IT functions. The brick is ideal for specific connector/IP class needs.
A protocol converter that connects CANopen devices to DeviceNet PLCs
The Anybus X-gateway CANopen Master to DeviceNet Adapter enables you to connect any CANopen Master device or equipment to DeviceNet control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enabling connectivity for computer systems to CAN networks via PCIe
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with one CAN channel and galvanic isolation, equipped with a standard profile slot bracket. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration, supporting various CAN applications.
Enable communication between industrial devices and BACnet MS/TP networks
The Anybus CompactCom 30 BACnet MS/TP without housing is a communication interface that can be embedded into any industrial device or machine to enable communication with BACnet MS/TP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
Enabling connectivity for computer systems to CAN networks via PMC
The Ixxat CAN-IB410/PMC is an active PMC interface card with two CAN channels and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN/CAN FD bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
A protocol converter that connects Modbus RTU and POWERLINK control systems
The Anybus X-gateway Modbus RTU Slave to POWERLINK Device enables you to connect any Modbus RTU system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enabling connectivity to CAN networks via USB
The Ixxat USB-to-CAN V2 embedded with galvanic isolation is an easy and cost-efficient way to connect a computer with an internal USB connection to a CAN bus network. It enables simple integration into diverse industrial setups, supporting various CAN applications, from testing and development to maintenance and control tasks.
A protocol converter that connects POWERLINK and POWERLINK control systems
The Anybus X-gateway POWERLINK Device to POWERLINK Device enables you to connect any POWERLINK system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects AS-Interface devices to PROFINET-IRT PLCs
The Anybus X-gateway AS-Interface Master to PROFINET IRT Device enables you to connect any AS-Interface device or equipment to PROFINET IRT control systems. It can be used when there is no existing AS-Interface control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Evaluate the CompactCom Brick and its API before starting your integration
The Anybus CompactCom Starter Kit enables evaluation and demonstration of different applications and use cases in a Windows environment. It offers instant access to CompactCom when combined with Anybus’ Host Application Example Code. Please note, Anybus CompactCom Bricks and connector boards must be ordered separately.
Enable communication between industrial devices and EtherNet/IP networks
The Anybus CompactCom 30 EtherNet/IP is a communication interface that can be embedded into any industrial device or machine to enable communication with EtherNet/IP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
A protocol converter that connects CANopen and PROFINET-IRT FO control systems
The Anybus X-gateway CANopen Slave to PROFINET-IRT FO Device enables you to connect any CANopen system to any PROFINET-IRT FO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Expanding connectivity of CAN interface cards
The MultiCAN expansion board for the Ixxat CAN-IB series enhances the card's capabilities by providing two additional high-speed CAN channels. Acting as a piggy-back module, it doubles the number of available high-speed CAN channels on a D-Sub 9 connector and reduces slot requirements, making it ideal for expanding CAN networks efficiently.
KNX to Modbus TCP & RTU - 250 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects DeviceNet devices to PROFIBUS PLCs
The Anybus X-gateway DeviceNet Master to PROFIBUS Slave enables you to connect any DeviceNet device or equipment to PROFIBUS control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
The Ixxat SG gateways offer versatile solutions for integrating various industrial and energy-related devices into SCADA or cloud systems. They are designed for use in energy infrastructure, aiding energy providers, system integrators, and consumers in efficient and secure communication.
Enabling connectivity for computer systems to PROFINET IRT networks
The Ixxat INpact PIR Slave PCIe Mini Kit is a versatile and efficient solution to connect PCs to Profinet IRT networks. This preconfigured variant features a compact PCIe Mini format and delivers precise, isochronous real-time data exchange, ideal for motion control and synchronized tasks. The kit includes a connection cable and bus coupling unit.
BACnet/IP & MS/TP to KNX - 600 points
Integrate any BACnet MS/TP or BACnet/IP server device with any KNX device or system. This integration aims to make BACnet objects data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa.
A protocol converter that connects EtherCAT and Lonworks control systems
The Anybus X-gateway EtherCAT Slave to Lonworks Slave enables you to connect any EtherCAT system to any Lonworks control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enabling streamlined automotive applications based on CAN
The Ixxat FRC-EP170 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based operations. Featuring LIN and six CAN channels, thereof two CAN FD and one CAN low-speed capable, it's ideal for logging, gateway, and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Replaced by: IN701KNX1000000
Designed for the integration of any KNX device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aimed to make KNX communication objects and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
Enable communication between industrial devices and PROFINET networks
The Anybus CompactCom 40 PROFINET-IRT - Transparent Ethernet is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. The Transparent Ethernet channel lets you utilize high-end processors for custom IT functions. The module includes connectors for a fast time to market.
DALI to Modbus TCP - 1 DALI channel
Integrate any DALI/DALI-2 driver and DALI-2 light sensor or occupancy sensor with a Modbus BMS or any Modbus TCP controller. This integration aims to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and viceversa.
A protocol converter that connects serial devices to PROFINET-IRT control systems.
The Anybus Communicator – Serial Master to PROFINET-IRT converts serial protocols to PROFINET-IRT, enabling you to connect any RS-232/485 device or equipment to PROFINET-IRT control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enabling connectivity for computer systems to CAN networks via PCIe
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with one CAN channel. It is an easy and very cost-efficient way to connect computers to a CAN bus network, enabling simple integration into diverse industrial setups, supporting various CAN applications.
Enable communication between industrial devices and PROFINET-IRT networks
The Anybus CompactCom 40 Without Housing - PROFINET-IRT is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET-IRT networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
Enable communication between industrial devices and BACnet MS/TP networks
The Anybus CompactCom 30 BACnet MS/TP is a communication interface that can be embedded into any industrial device or machine to enable communication with BACnet MS/TP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
Enable communication between industrial devices and PROFINET IO 2-Port networks
The Anybus CompactCom 30 PROFINET 2-port is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. The brick version is fully embedded into the industrial device and is the best choice if you have limited space or need a specific connector or protection class.
Replaced by: IN7004851K20000
Designed for the integration of any Modbus RTU or TCP server device, or both simultaneously, with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make Modbus signals and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
A protocol converter that connects Ethernet and PROFIBUS DP control systems
The Anybus Communicator Ethernet to PROFIBUS DP device ATEX enables you to connect any Ethernet control system to any PROFIBUS DP control system. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
Enable communication between industrial devices and PROFIBUS networks
The Anybus CompactCom 40 PROFIBUS is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFIBUS networks. The brick version is fully embedded into the industrial device and is the best choice if you have limited space or need a specific connector or protection class.
Enable communication between industrial devices and CC-Link IE TSN networks
The Anybus CompactCom 40 Without Housing - CC-Link IE TSN is a communication interface that can be embedded into any industrial device or machine to enable communication with CC-Link IE TSN networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
Enabling connectivity for computer systems to industrial Ethernet networks
The Ixxat INpact CE Slave PCIe is a versatile and efficient solution to connect PC-based slave applications to various industrial networks. This Common Ethernet variant offers preinstalled or downloadable Industrial Ethernet protocols for flexible multi-network communication and offers a robust PCIe format.
Enable communication between industrial devices and PROFINET networks
The Anybus CompactCom 40 PROFINET-IRT - Transparent Ethernet is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. The Transparent Ethernet channel lets you utilize high-end processors for custom IT functions. The module includes connectors for a fast time to market.
Enable communication between industrial devices and EtherNet/IP networks
The Anybus CompactCom 30 EtherNet/IP 2-port is a communication interface that can be embedded into any industrial device or machine to enable communication with EtherNet/IP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
Enables transparent RS-232 communication
The Anybus CompactCom 30 RS-232 without housing is a passive module that acts as a physical layer converter for RS-232 communication. As a passive module, it doesn’t process the serial bitstream. This module enables a transparent RS-232 channel using the Anybus CompactCom slot. The module uses the serial channel of the application interface.
Enabling connectivity for computer systems to EtherNet/IP networks
The Ixxat INpact EIP Slave PCIe Mini Kit is a versatile and efficient solution to connect PC-based applications to Ethernet/IP networks. This preconfigured variant features a compact PCIe Mini format and provides interoperability and reliable communication in diverse industrial settings. The kit includes a connection cable and bus coupling unit.
BACnet/IP & MS/TP to Modbus TCP & RTU - 250 points
Integrate any BACnet MS/TP or BACnet/IP server device with a Modbus BMS or any Modbus TCP or RTU controller. This integration aims to make BACnet objects, data, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
LonWorks TP/FT-10 to BACnet/IP & MS/TP - 100 points
Integrate any LON device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make LON devices, their network variables (SNVT), and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.
A protocol converter that connects PROFIBUS devices to EtherNet/IP PLCs
The Anybus X-gateway PROFIBUS Master to EtherNet/IP Adapter enables you to connect any PROFIBUS device or equipment to EtherNet/IP control systems. It can be used when there is no existing PROFIBUS control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Content of Delivery
CAN@net NT device, user manual, Mini USB cable, available as free download: CAN-Gateway Configurator tool, CAN driver VCI, simple CAN monitor "canAnalyser Mini"
Not Included (in delivery)
comprehensive and powerful driver and software packages are available as free download
Net Width (mm)
99 mm
Net Height (mm)
114.5 mm
Net Depth (mm)
22.5 mm
Net Weight (g)
165 g
Mounting
DIN rail mount (bracket included)
Current Consumption Type Value at Vcc Nom (mA)
110 mA (24 V DC), 230 mA (12 V DC)
Input Voltage (V)
9 V to 36 V DC, with overvoltage and polarity protection
Power Connector
2-pole
Isolation
1 kV DC for 1 sec.
Isolation Voltage (kV)
1 kV DC kV
Operating Temperature °C Min
-40 °C
Operating Temperature °C Max
85 °C
Storage Temperature °C Min
-40 °C
Storage Temperature °C Max
85 °C
Housing Materials
Polyamide housing for top hat rail mounting
Packaging Material
Cardboard
Configuration
The Ixxat CAN@net NT series is configured and updated with a straightforward Windows configuration tool through USB or Ethernet. This tool simplifies setting up filters, mapping, multiplexers, or translation rules, requiring no programming expertise.
CE
Yes
UL
Yes
FCC
Yes
WEEE Category
IT and telecommunications equipment
UKCA
Yes
Protection Class IP
IP20
Connectors / Input / Output
1 x RJ45 connector, 1 x Mini USB port, 3 x screw terminals (2 x fieldbus, 1 x power)
Contains Battery
No
Brand
Ixxat
Country of Origin
Germany
Dual Usage
No
Export Control Classification Number (ECCN)
EAR99
Item Number
1.01.0332.20000
Product Lifecycle State
Active
CAN Mode
CAN high-speed (ISO 11898-2:2016)
Can't find a distributor or partner or need help to figure out which partner suits you?
No problem, you can always contact your nearest HMS office and let our sales and customer service staff take care of your enquiry.
To download this file you need to submit your email address. You will then get an email with the download link
Invalid email address
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
CAN@net NT 100/200/420 and CANbridge NT 200/420 Firmware Update - Release Information
|
6.3.5 | txt | 12.5 KB |
1bfa2b05-22ce-6706-92f4-ff00001bbfd4
Download
|
|
The Step 3 file contains the data of all product variants of the CAN@net NT and the CANbridge NT in a combined file.
|
Step 3D file for CAN@net NT, CANbridge NT
|
stp | 31.1 MB |
74f82b05-22ce-6706-92f4-ff00001bbfd4
Download
|
|
New firmware (5.01.003) and new configurator (5.2.3). For further information please see the readme file.
|
CAN@net NT 200/420 and CANbridge NT 200/420 Firmware Update
|
6.3.5 | zip | 805.6 KB |
7e268605-22ce-6706-92f4-ff00001bbfd4
Download
|
Application Note - How to change from CAN@net II to CAN@net NT 100
|
1.0 | 726.9 KB |
86e95805-22ce-6706-92f4-ff00001bbfd4
Download
|
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
UL Certificate of Compliance
|
812.8 KB |
b6aa4c05-22ce-6706-92f4-ff00001bbfd4
Download
|
|||
CAN-at-Net-NT & CANbridge NT UK Declaration of Conformity
|
160.2 KB |
b30ba305-22ce-6706-92f4-ff00001bbfd4
Download
|
|||
CAN-at-Net-NT & CANbridge NT EU Declaration of Conformity
|
194.3 KB |
9ef82b05-22ce-6706-92f4-ff00001bbfd4
Download
|
|||
MTBF Certificate
|
1.0 MB |
162ba205-22ce-6706-92f4-ff00001bbfd4
Download
|
Manuals
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
CAN Gateway Configurator for CAN@net NT & CANbridge NT English
|
1.8 | 3.0 MB |
36fb2b05-22ce-6706-92f4-ff00001bbfd4
Download
|
||
CAN@net NT Manual Generic Protocol
|
1.9 | 308.9 KB |
22fb2b05-22ce-6706-92f4-ff00001bbfd4
Download
|
||
C-API ixcan for CAN@net NT English
|
1.1 | 416.5 KB |
cc934c05-22ce-6706-92f4-ff00001bbfd4
Download
|
||
Lua ADK for CAN@net NT & CANbridge NT English
|
1.5 | 288.2 KB |
f48a4b05-22ce-6706-92f4-ff00001bbfd4
Download
|
||
CAN@net NT 100/200/420 Manual English
|
2.1 | 1.2 MB |
59fb2b05-22ce-6706-92f4-ff00001bbfd4
Download
|
Windows drivers
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
VCI V4 - Windows 11, 10 [Driver, canAnalyser-Mini, Manuals, LabView and other add-ons]
|
4.0.1187.0 | zip | 77.9 MB |
f0d39a05-22ce-6706-92f4-ff00001bbfd4
Download
|
|
VCI V4 - Windows 11, 10 - Release Information
|
4.0.1187 | 1.2 MB |
29d49a05-22ce-6706-92f4-ff00001bbfd4
Download
|
||
For Windows 7 an installed SP1 (Service Pack 1) is required for installation of the VCI V4.
|
VCI V4 - Windows 11, 10, 8, 7 [Driver, canAnalyser-Mini, Manuals, LabView and other add-ons]
|
4.0.939.0 | zip | 73.7 MB |
41252f05-22ce-6706-92f4-ff00001bbfd4
Download
|
VCI V4 - Windows 11, 10, 8, 7 - Release Information
|
4.0.939.0 | 1.0 MB |
6b374b05-22ce-6706-92f4-ff00001bbfd4
Download
|
Linux drivers
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
The ECI driver allows to use the Ixxat CAN interfaces under Linux and supports CAN2.0A/B as well as ISO CAN FD and non-ISO CAN FD. Linux Kernel Version: 2.6 up to 5.3. Tested using Debian/Ubuntu 18.04 LTS (64 bit).
|
ECI Driver for Linux (64 bit)
|
1.13.3877.0 | zip | 33.2 MB |
c4252f05-22ce-6706-92f4-ff00001bbfd4
Download
|
ECI Driver for Linux - Release Information
|
1.13.3877.0 | txt | 20.7 KB |
a3934c05-22ce-6706-92f4-ff00001bbfd4
Download
|
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
Ixxat All you need for CAN Brochure MMI119 (English)
|
6 | 4.7 MB |
dda14505-22ce-6706-92f4-ff00001bbfd4
Download
|
File | Product / versions | Filetype | Size | ||
---|---|---|---|---|---|
Linux Command Line Tool to exchange configuration data with CAN@net NT/CANbridge NT
|
6.05 | gz | 114.4 MB |
17ee5f05-22ce-6706-92f4-ff00001bbfd4
Download
|
|
Readme - Linux Command Line Tool
|
6.05 | txt | 2.5 KB |
4dee5f05-22ce-6706-92f4-ff00001bbfd4
Download
|
|
The CAN Gateway Configurator for Windows enables the easy configuration of the CANbridge NT and the CAN@net NT.
|
CAN Gateway Configurator - CANbridge NT & CAN@net NT 100/200/420
|
6.3.3 | zip | 21.0 MB |
b0f72b05-22ce-6706-92f4-ff00001bbfd4
Download
|
Training from HMS Academy reduces the total cost and time of your project and gives improved quality and efficiency of the solution.
HMS offers trainings related to products, technologies and more. This could be in the form of an onsite training, online training or by running one of our E-learning sessions.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.