canAnalyser 3 Standard

Order code: AB6664-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Order code: 101-827220

The Anybus Mercury MKII is a rugged industrial Windows tablet that uses the Osiris diagnostic software to simplify Industrial Ethernet and PROFIBUS troubleshooting, maintenance, and monitoring. The mobile tool helps you quickly identify and resolve potential faults to keep your network healthy and efficient.

Order code: SP1137-2

The Anybus CompactCom is designed to use a compact flash connector as application connector. HMS offers a host connector, that is designed to simplify the mounting and to meet the demands for a secure and stable connection of the Anybus CompactCom modules (with or without housing).

Order code: AB6669-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Order code: 024711-B

Set for mounting Anybus Wireless Bridge devices to a wall or mast. It can be moved on two axes for optimum radio signal alignment.

Order code: AB6667-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Order code: 1.01.0097.00000

The Ixxat CANcheck is a portable, user-friendly tool for CAN/CANopen network analysis. It's ideal for commissioning, maintenance, and troubleshooting, offering direct network connectivity and battery-powered operation for quick and accurate diagnostics. Its intuitive menu and hand-held design make it an essential tool for efficient diagnosis.

Order code: 38022

ProfiTrace is an essential tool for maintenance and troubleshooting and is currently the most powerful mobile analyzer for PROFIBUS networks.

Order code: 40209

The PROFIBUS Cable Striping Tool removes the sheath and exposes the shielding with the exact length for the required plugs. No cable is wasted and it eliminates other tools.

Order code: 024720-B

The Anybus PROFINET Master Simulator Plus License enables you to set up and test slaves/adapters on PROFINET without a PLC in place. Acyclic, PROFIsafe, and logging if I/O data is supported. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer. Software only.

Order code: 1.12.0166.31000

The canAnalyser is a versatile tool for the development, testing and servicing of CAN, CAN FD and LIN based systems. The software package is based on a modular concept and available in three versions (mini, lite and standard) with a different set of functions and modules.

Order code: AB6668-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Order code: AB6665-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Order code: 1.12.0133.31000

The canAnalyser is a versatile tool for the development, testing and servicing of CAN, CAN FD and LIN based systems. The software package is based on a modular concept and available in three versions (mini, lite and standard) with a different set of functions and modules.

Order code: 018410

The Anybus DeviceNet Master Simulator enables you to set up and test slaves/adapters on DeviceNET without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.

Order code: 1.04.0144.00002

CanEasy is a Windows-based analysis and test environment for CAN (FD), LIN and Automotive Ethernet. The tool simulates the bus traffic, has a high degree of automation, can be easily configured and extended with the help of plug-ins. CanEasy can be used throughout the development process, from testing to commissioning.

Order code: 513-00031

The EtherMIRROR 10/100 is a transparent measuring point for any industrial network running on PROFINET or EtherNet/IP.

Order code: 37020

ProfiTrace is an essential tool for maintenance and troubleshooting and is currently the most powerful mobile analyzer for PROFIBUS networks.

Order code: AWB5901-B

An outdoor directional 5GHz antenna with dual elements intended for point-to-point connections. Suitable for use with Anybus Access Points. Please note that cables are ordered separately.

Order code: 513-00032

The EtherMIRROR 1G is a transparent measuring point for any industrial network running on PROFINET or EtherNet/IP.

Order code: 37021

ProfiTrace is an essential tool for maintenance and troubleshooting and is currently the most powerful mobile analyzer for PROFIBUS networks.

Order code: AB6666-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.

Order code: 017505

The Anybus PROFIBUS-DPV1 Master Simulator enables you to set up and test slaves/adapters on PROFIBUS-DPV1 without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.

Order code: AWB4006-B

The Anybus Power over Ethernet Injector (PoE) makes it possible to supply an Anybus product, for example an Anybus WLAN Access point or Anybus Wireless Bolt RJ45, with power through an Ethernet cable.

Order code: 024709-B

The Bolt Base Protector and mounting bracket offer the Bolt an all-around IP66/67 protection. This is ideal for outdoor usage or where the conditions are harsh and demanding.

Order code: 1.04.0144.00000

CanEasy is a Windows-based analysis and test environment for CAN (FD), LIN and Automotive Ethernet. The tool simulates the bus traffic, has a high degree of automation, can be easily configured and extended with the help of plug-ins. CanEasy can be used throughout the development process, from testing to commissioning.

Order code: 024850-B

This adapter board gives an Anybus CompactCom Module the possibility to connect to the STM3240G-EVAL board. On this interface, the serial (UART), SPI, 8-bit parallel, and 16-bit parallel host communication interfaces are available. Please note, Anybus CompactCom Modules must be ordered separately.

Order code: 024717-B

The Anybus Power over Ethernet Injector (PoE) makes it possible to supply the Anybus Wireless Bolt RJ45, with power through an Ethernet cable. 100-250VAC input, no additional power supply needed.

Order code: 019920

The Anybus CANopen Master Simulator enables you to set up and test slaves/adapters on CANopen without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.

Order code: 024710-B

The Anybus PROFINET Master Simulator enables you to set up and test slaves/adapters on PROFINET without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer. Software only.

Order code: 1.04.0144.00001

CanEasy is a Windows-based analysis and test environment for CAN (FD), LIN and Automotive Ethernet. The tool simulates the bus traffic, has a high degree of automation, can be easily configured and extended with the help of plug-ins. CanEasy can be used throughout the development process, from testing to commissioning.

Order code: 017504

The Anybus PROFIBUS Master Simulator enables you to set up and test slaves/adapters on PROFIBUS without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.

Order code: 020853-C

Order code: AB6663-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.