Anybus CompactCom Connector Board - DeviceNet
Network connectors - ready for use together with the CompactCom Brick
Order code: AB6664-B
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Boost your Wi-Fi range in point-to-point applications
Item number AWB5901-B
An outdoor directional 5GHz antenna with dual elements intended for point-to-point connections. Suitable for use with Anybus Access Points. Please note that cables are ordered separately.
IP65 rated and pole mounting options.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Enablemobile multi-protocol industrial network monitoring with just one device.
The Anybus Mercury MKII is a rugged industrial Windows tablet that uses the Osiris diagnostic software to simplify Industrial Ethernet and PROFIBUS troubleshooting, maintenance, and monitoring. The mobile tool helps you quickly identify and resolve potential faults to keep your network healthy and efficient.
Specially designed for easy mounting for all CompactCom modules
The Anybus CompactCom is designed to use a compact flash connector as application connector. HMS offers a host connector, that is designed to simplify the mounting and to meet the demands for a secure and stable connection of the Anybus CompactCom modules (with or without housing).
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Position your Anybus Wireless Bridge in an optimal direction
Set for mounting Anybus Wireless Bridge devices to a wall or mast. It can be moved on two axes for optimum radio signal alignment.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Enabling efficient diagnosis and maintenance of CAN networks
The Ixxat CANcheck is a portable, user-friendly tool for CAN/CANopen network analysis. It's ideal for commissioning, maintenance, and troubleshooting, offering direct network connectivity and battery-powered operation for quick and accurate diagnostics. Its intuitive menu and hand-held design make it an essential tool for efficient diagnosis.
This tool enables network measurements to troubleshoot issues on running production.
ProfiTrace is an essential tool for maintenance and troubleshooting and is currently the most powerful mobile analyzer for PROFIBUS networks.
A pocket size tool for speeding up the assembly of a PROFIBUS cable.
The PROFIBUS Cable Striping Tool removes the sheath and exposes the shielding with the exact length for the required plugs. No cable is wasted and it eliminates other tools.
A software tool for testing PROFINET functionality effortlessly
The Anybus PROFINET Master Simulator Plus License enables you to set up and test slaves/adapters on PROFINET without a PLC in place. Acyclic, PROFIsafe, and logging if I/O data is supported. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer. Software only.
Enabling easy analysis of CAN-based networks
The canAnalyser is a versatile tool for the development, testing and servicing of CAN, CAN FD and LIN based systems. The software package is based on a modular concept and available in three versions (mini, lite and standard) with a different set of functions and modules.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Enabling easy analysis of CAN-based networks
The canAnalyser is a versatile tool for the development, testing and servicing of CAN, CAN FD and LIN based systems. The software package is based on a modular concept and available in three versions (mini, lite and standard) with a different set of functions and modules.
A software based tool for testing DeviceNet functionality effortlessly
The Anybus DeviceNet Master Simulator enables you to set up and test slaves/adapters on DeviceNET without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.
Enabling software-based residual bus simulation and analysis
CanEasy is a Windows-based analysis and test environment for CAN (FD), LIN and Automotive Ethernet. The tool simulates the bus traffic, has a high degree of automation, can be easily configured and extended with the help of plug-ins. CanEasy can be used throughout the development process, from testing to commissioning.
Enable quick measuring access points within your indsutrial network.
The EtherMIRROR 10/100 is a transparent measuring point for any industrial network running on PROFINET or EtherNet/IP.
This tool enables network measurements to troubleshoot issues on running production.
ProfiTrace is an essential tool for maintenance and troubleshooting and is currently the most powerful mobile analyzer for PROFIBUS networks.
Boost your Wi-Fi range in point-to-point applications
An outdoor directional 5GHz antenna with dual elements intended for point-to-point connections. Suitable for use with Anybus Access Points. Please note that cables are ordered separately.
Enable quick measuring access points within your indsutrial network.
The EtherMIRROR 1G is a transparent measuring point for any industrial network running on PROFINET or EtherNet/IP.
This tool enables network measurements to troubleshoot issues on running production.
ProfiTrace is an essential tool for maintenance and troubleshooting and is currently the most powerful mobile analyzer for PROFIBUS networks.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
A software based tool for testing PROFIBUS-DPV1 functionality effortlessly
The Anybus PROFIBUS-DPV1 Master Simulator enables you to set up and test slaves/adapters on PROFIBUS-DPV1 without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.
Power your Anybus device through a single Ethernet cable
The Anybus Power over Ethernet Injector (PoE) makes it possible to supply an Anybus product, for example an Anybus WLAN Access point or Anybus Wireless Bolt RJ45, with power through an Ethernet cable.
Mount your Anybus Wireless Bolt on a wall or pole
The Bolt Base Protector and mounting bracket offer the Bolt an all-around IP66/67 protection. This is ideal for outdoor usage or where the conditions are harsh and demanding.
Enabling software-based residual bus simulation and analysis
CanEasy is a Windows-based analysis and test environment for CAN (FD), LIN and Automotive Ethernet. The tool simulates the bus traffic, has a high degree of automation, can be easily configured and extended with the help of plug-ins. CanEasy can be used throughout the development process, from testing to commissioning.
Evaluate the CompactCom Module and its API before starting your integration
This adapter board gives an Anybus CompactCom Module the possibility to connect to the STM3240G-EVAL board. On this interface, the serial (UART), SPI, 8-bit parallel, and 16-bit parallel host communication interfaces are available. Please note, Anybus CompactCom Modules must be ordered separately.
Power your Anybus device through a single Ethernet cable
The Anybus Power over Ethernet Injector (PoE) makes it possible to supply the Anybus Wireless Bolt RJ45, with power through an Ethernet cable. 100-250VAC input, no additional power supply needed.
A software based tool for testing CANopen functionality effortlessly
The Anybus CANopen Master Simulator enables you to set up and test slaves/adapters on CANopen without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.
A software tool for testing PROFINET functionality effortlessly
The Anybus PROFINET Master Simulator enables you to set up and test slaves/adapters on PROFINET without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer. Software only.
Enabling software-based residual bus simulation and analysis
CanEasy is a Windows-based analysis and test environment for CAN (FD), LIN and Automotive Ethernet. The tool simulates the bus traffic, has a high degree of automation, can be easily configured and extended with the help of plug-ins. CanEasy can be used throughout the development process, from testing to commissioning.
A software based tool for testing PROFIBUS functionality effortlessly
The Anybus PROFIBUS Master Simulator enables you to set up and test slaves/adapters on PROFIBUS without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
Training from HMS Academy reduces the total cost and time of your project and gives improved quality and efficiency of the solution.
HMS offers trainings related to products, technologies and more. This could be in the form of an onsite training, online training or by running one of our E-learning sessions.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
